Model:   T167
*3 ports 10/100Mbps auto MDI/MDIx Ethernet LAN + 1 ports 10/100Mbps WAN
*Wireless Ethernet IEEE 802.11b/g/n support
*Support all ADSL standards (ADSL1/2/2+),including Annex A, B,I,J,M & L
Features Technical Application
The 4 PORT WIFI 2T2R  is a high-performance wireless ADSL router, uplink rate up to 1 Mbps and downlink rate up to 24 Mbps. It provides one RJ11 telephone interface, four RJ45 Ethernet interfaces, one of them is for WAN connection. The telephone interface is used for connecting to the Internet provided by the telecom carrier. The Ethernet interfaces are used for connecting to the computer, through which you can access the Internet. Computers that are connected with the router through the Ethernet interfaces can establish a small local network area (LAN). Those computers can communicate with each other, sharing resources and files. The 4 PORT WIFI 2T2R  is an ideal broadband CPE solution for both home users who wish to share high-speed Internet access and small offices that wish to do business on the Internet.
The 4 PORT WIFI 2T2R  has Web-based graphic user interface (GUI), in which you can easily modify the settings and connect to your ISP. It also provides flow statistics, connection status, and other detailed information. It supports static IP address, dynamic IP address, and PPPoE connection. The 4 PORT WIFI 2T2R  is easily upgraded and provides terminal users and ISP with the guarantee of future

Home gateway
Small enterprise
Higher data rate broadband sharing
Shared broadband Internet access
Audio and video streaming and transfer
PC file and application sharing
Network and online gaming



System  Specifications


RT63365+ RT5392L+ RT63087


16MB SDRAM (16MB/32MB/64MB)


2 MB SPI Flash(4MB/8 MB)


2.4GHz 11b/g/n 2T2R 300Mbps

Feature and Technical Specifications

External Connectors

*   1 x DC power jack

*   1 x DC power Switch

*    3 x RJ45 for 10/100 Base-T Ethernet LAN

*    1 x RJ45 for 10/100 Base-T Ethernet WAN

*    1 x RJ11 interface for xDSL port

*    1 x Reset button for factory default settings

*    1 x WLAN button

*    1 x WPS button

LED Indicators

*    POWER

*    DSL


*    LAN1,LAN2,LAN3,LAN4

*    WLAN

*    WPS

ADSL Features

*    Annex A, I, J, L & M

*    ANSI T1.413i2

*    ITU G.992.1 (G.dmt)

*    ITU G.992.2 (G.lite)

*    ITU G.992.3 ADSL2 (G.dmt.bis)

*    ITU G.992.4 (G.lite.bis)

*    ITU G.992.5 (G.dmt.bisplus)

*    ITU G.994.1 (G.hs)

*    ITU G.995.1, ITU G.996.1, ITU G.997.1, ITU-T K.2.1

*    Power Saving Mode, L3 to L0 initialization

*    Support 8 PVCs

*    Support Traffic Shaping (ATM QoS) UBR, CBR, VBR-rt,VBR-nrt

*    Support OAM F4/F5 loop-back, AIS, and RDI OAM cells

*    UNI 3.1/4.0 Permanent Virtual Circuits

Wireless Features

*    Compatible with IEEE 802.11b\IEEE 802.11g and IEEE 802.11n

*    Support auto channel selection

*    Support WPS

*    Support 64/128-bit WEP, WPA-PSK & WPA2-PSK for wireless security

*    Support MAC address filtering

*    Wireless frequency range, 2400~2488 MHz ISM band

Routing Features

*    Routing (TCP/IP/UDP/ARP/ICMP)

*    802.1D MAC Bridge

*    RIP v1 (RFC1058), RIP v2 (RFC1723)

*    IGMP Snooping v1/v2/v3

*    IGMP Proxy(V1/V2)


*    Web based Configuration

*    Telnet management

*    Command-line Interpreter (CLI)

*    Web Page/X-Modem/FTP/TFTP Firmware upgrade

*    Remote Management

*    Diagnostic Tool for ADSL and IP Ping

*    CPE WAN Management Protocol

*    Universal Plug and Play (UPnP) Internet Gateway Device (IGDv1.0)

*    IETF RFC 2030 SNTP (Simple Network Time Protocol) Client


*    IPv4

*    IPv6 (IPv6 ready logo Phase II core for router, Dual stack)

*    DHCP Server/Relay, DHCP Client (WAN Port)

*    PPPoE, PPPoA, IPoA , RFC 2684 Bridging/Routing

*    NAT and PAT

*    Static Routing

*    ALG (MSN Messenger, PPTP, L2TP, FTP, RTSP (RealTime Streaming Protocol), SIP v1/v2, H.323, IPSEC

*    DMZ, Virtual Server ( Port forwarding)

*    PPPoE passthrough (Bridge Interface)

*    Port binding(LAN/WAN/USB/WLAN)

*    VPN (IPSec, PPTP, L2TP) pass-through


*    Management Access Control for LAN/WAN sides

*    Prevent port scanning & illeagle packet attack

*    Stateful Packet Inspection(SPI)

*    IP Spoofing, IP with zero length

*    IP/ MAC filtering, Application filtering, URL filter

Environment Requirements

Operating Temperature

0ºC - 40ºC (32℉ - 104℉)

Storage Temperature

-40ºC - 70ºC (-40℉ - 158℉)

Operating Humidity

10% - 95%, non-condensing

Storage Humidity

5% - 95%, non-condensing

Power adapter input

100V - 240V AC, 50/60Hz

Power adapter output

12V DC, 500mA



EMC and Safety 

Regulatory Compliance



CCC Class B

Safety Regulations


Green Standard


Physical Characteristics 

Physical Dimension

L*W*H= 125.5*110 mm* 50mm


178g (not including power adapter)

Related Products